Despite our best intentions, sometimes regular tack cleaning falls to the bottom of our to do list leaving tack brittle, dusty or moldy! Lucky for you, tack can recover from all kinds of tragedies!
Let us help you bring your tack back from the dead!
Restore Hard or Brittle Leather:
When tack gets neglected and dried out, it can be disheartening. Follow these steps to help restore your leather gear before giving up!
- Begin by taking apart your tack; it is important to disassemble the equipment so you can clean under buckles where trapped dirt can break down leather.
- Next, clean the leather with Lexol Leather Cleaner to remove surface dirt and sweat before oiling.
- Apply a thin coat of Lexol Leather Conditioner full of beneficial oils. Applying some oil is good, but a little oil goes a long way. Too much oil keeps the leather from being able to breathe and will hold excess moisture and cause the leather to rot. Too little oil and the leather can become brittle and dry, causing it to crack or tear.
- If the leather is still stiff and brittle after a day or two, lightly work in another coat of Lexol Conditioner using a damp towel. Allow the leather to absorb the conditioner for 20-30 minutes, then wipe it down with a dry towel.
- If the leather is still in need of softening, wait a month and repeat the entire process. Sometimes you can help soften leather by wetting your hands with Lexol Conditioner and "working" the leather with your hands.
How to Remove Mold & Mildew:
Unfortunately, once mold and mildew spores get into leather fibers, it is almost impossible to completely destroy them. If mold and mildew access your leather, take these steps to limit the damage:
- Clean the leather outdoors, to avoid filling the air in the tack room with mold spores. Have a supply of old cloths handy that you are willing to throw out, do not rinse and reuse infected cloths or brushes.
- Next, clean the leather with a pH balanced leather cleaner such Lexol Cleaner and use plenty of water and scrub the leather with a soft cloth or soft bristled brush that won't scratch the leather. If using a brush, we recommend testing a small area of the saddle to make sure it does not leave any scratch marks.
- After cleaning, apply a light application of Lexol Conditioner to protect and soften the leather.
- Dry the tack in the sun, and allow the water to evaporate before storing. The sun's ultraviolet lights have great disinfectant properties!
Be cautious of using traditional saddle soaps to clean moldy leather. Saddle Soaps often contain Glycerin, which acts as a "humectant" meaning they tend to attract and hold atmospheric moisture. Although this property is great for softening leather fibers, it sets your tack up for future mold and mildew growth!
Prevention is Key! Be Proactive and Keep Your Leather Gear Looking Like New!
- After each use, clean dirt and sweat off your tack and allow the undersides of saddles and headstalls to dry before they go back in the tack room.
- Store your saddles and tack in a clean, dry, and well ventilated area with a controlled temperature. If you live in an area with high humidity, a dehumidifier may be a good investment to help keep your tack mold free.
- Keep you saddle on a rack or stand whenever it is not being used. Try to avoid storing your saddle laying on its side or by its horn, it will cause your saddle to become misshapen.
- Rodents may also be an issue for stored tack. Never underestimate the value of a barn cat.
- Always keep your saddle covered when not in use; it will keep critters off your saddle and keep dust from settling.
- Equine Nutrition
- Ask The Experts
- Equine Health
- Equine Conditions
- Fly Control
- Wound & Skin Care
- Leather Care
- Barn & Stable
- Horse Care
- Just For Fun
- Hoof Care
- supplements horses
- Broodmares & Foals
- Senior Horse Care
- Joint Care
- Natural Horsecare
- Success Stories
- fly spray
- Equine Health Care
- Horse Liniments
- Weight gain
- Equine Rescues
- Stable Management